ENGLISH
LISTENING TO A PROGRAM SOURCE
Basic Operation
15
• Each time the POWER button is pressed, the unit is turned on to
enter the operating mode(the STANDBY indicator lights up in
blue)or off to enter the standby mode(the STANDBY indicator lights
up in amber).
• In the standby mode, if the PLAY/PAUSE(
/ ) or
OPEN/CLOSE(
) button is pressed, the unit can be also turned on.
Standby mode
This means that the unit is not disconnected from the AC mains and
a small amount of current is retained to support the operation
readiness.
• For details on operating the supplied active subwoofer, refer to
“OPERATION OF ACTIVE SUBWOOFER” on page 14.
• Each time the FUNCTION SELECT button on the front panel, the
input source changes as follows :
DVD
FM
AM
TAPE
AUX
(frequency display)
• “MUTE” flickers.
• To resume the pervious sound level, press the MUTING button
again.
• Then the sound from the speakers is cut off.
Turn the power on.
1
Select the desired input source.
3
Turn on the supplied active subwoofer and
source component for playback.
2
Adjust the(overall) volume to a comfortable listening level.
5
Operate the selected component for playback.
4
To mute the sound.
6
To listen with the headphones.
7
PHONES
Before operation
• Before operating this unit with the supplied remote control, refer to "UNIVERSAL REMOTE CONTROLS" on page 10 for details
about operation.
