Sherwood AX-50, Operating Instructions Manual

7

FRONT & REAR PANEL

1.  ON/OFF: 

 Press to turn the unit either into ON or STAND.

2.  SOURCE: 

 Press to select input source (BT, DIGITAL, CD, 

BD/DVD, TUNER, PHONO, LINE IN)

TO USE BT/ DIGITAL: 

Optical : LED - Orange color Coaxial : LED - Green color BT : 

LED - Red color

3.  VOLUME:

  Controls the volume level of all audio chan-

nels.

4.  BALANCE: 

Use to dial to balance the speaker level from 

Left to Right

5.  TREBLE:

  Use this dial for Treble adjustment

6.  BASS:

  Use this dial for Bass adjustment 

7.  LINE IN: 

 Use to connect LINE IN device

8.  TONE DIRECT: 

 Press to select TONE DIRECT mode

9.  SPEAKER A/B: 

 Use to select speaker A/B 

Speaker A:  LED - Green colour 

Speaker B:  LED - Red colour 

Speaker A+B:  LED - Orange colour 

None:  LED - Off

10.  REMOTE SENSOR: 

 Aim Remote Control at this

11.  PHONES: 

 Outputs audio signals for private listening 

with headphones

1.  ANALOGUE INPUTS:  

PHONO, CD, BD/DVD, TUNER

2.  REC OUT:  

This analog audio output is for connecting a 

recorder with an analog audio input

3.  SUB OUT:

  This is for connecting an Active Subwoofer

4. SPEAKER TERMINAL SET A:  

These terminal posts are for 

connecting L/R speakers for Speaker Set A (maximum 1 Pair

5.  Coaxial Digital:  

These coaxial digital audio inputs are for 

connecting components with coaxial digital audio out puts, 

such as CD and BD/DVD players

6.  Optical Digital:  

These optical digital audio inputs are for 

connecting components with optical digital audio outputs, 

such as CD and DVD/BD players

7.  BLUETOOTH:  

The Units Bluetooth module (Non Re

-

movable)

8.  115/230V:  

This switch is used to select between 115V 

or 230V.  

FOR AUSTRALIAN AND NEW ZEALAND CUS-

TOMERS - DO NOT CHANGE FROM THE DEFAULT 230V 

POSITION

9.  AC OUTLET:

  Socket for connecting the supplied IEC 

Mains Power Cord for connection to mains power

10.  USB UPGRADE: 

  For connection to a PC for upgrad

-

ing the units Firmware - For Authorized Service Personnel 

use only

11.  SPEAKER TERMINAL SET B:  

These terminal posts are 

for connecting L/R speakers for Speaker Set B (maximum 

1 Pair)

Rear Panel Connections:

Front Panel Controls: