ENGLISH
Checking the programmed tracks
Clearing the programmed tracks
Rectifying any wrong programmed track
Each time the PROGRAM/REVIEW button is
pressed in the program mode (meaning
“PGM” lights up in the stop mode), the
programmed tracks will appear in the
programmed sequence.
Example) When track 5, 9 and 7 are programmed
and you want to replace track 9 with
track 10.
1
Select track 10.
2
Store the desired track in the memory.
3
To clear one by one
Each time this button is pressed in the program
mode, the programmed tracks are cleared one by
one in the opposite sequence.
To clear a specific track.
Find the desired track and clear it in the program
mode.
To clear all programmed tracks.
Press this button for more than 4 seconds in the
program mode.
Or press OPEN/CLOSE button( ).
When selecting a track with the NUMERIC
buttons, the selected track is stored automatically
without the PROGRAM/REVIEW button.
PROG/REV
or
PROG/REV
PROG/REV
PROG/REV
or
PROG/REV
or
PROG/REV
PROG/REV
or
or
or
within 2 sec
within 2 sec
or
Find track 9 in the program mode.
or
or
or
15
