Troubleshooting Guide
ENGLISH
If your unit does not perform as expected, consult the table below to see if the problem can be corrected before
seeking help from your dealer or our service organization.
PROBLEM
POSSIBLE CAUSE
REMEDY
No power
The AC input cord is disconnected.
The POWER switch is not pressed
correctly.
Connect the cord securely.
Press the POWER switch ON.
No sound
Incorrect connections.
Incorrect operation of the amplifier.
The “ ” indicator lights up.
Make connections correctly.
Operate the amplifier correctly.
Press the “ ” button to cancel
the pause mode.
Poor or distorted sound
The unit is connected to the PHONO
input jacks of the amplifier.
Poor connections.
Make connections correctly.
Check the connections and connect
all cords securely.
Sound skips
Defective or deeply scratched disc.
This unit is placed on a surface that is
subject to vibration or physical shock.
Play another disc.
Place this unit on a stable surface.
Programming does not
perform.
The disc is dirty or badly scratched.
The programming procedure is not
correct.
The number of the programmed tracks is
20.
Try again with a scratch-free disc.
Try again.
Check the number of the
programmed tracks.
No play
The disc is loaded upside down.
Dirty disc.
Defective or deeply scratched disc.
Reload the disc with the printed side
up.
Clean the disc.
Load another disc.
20
