S9/S7 3D Sound Soundbar
24
* Default settings are shown in bold below.
Setting
Option
Descriptions
1 SYSTEm SET
STANDBY
(Auto Standby)
6hr
Sets the standby time for the system.
4hr
2hr
OFF
DRC (Dynamic
Range Control)
OFF
Adjusts the level of dynamic range for movie
soundtracks optimized for Dolby Digital, DTS,
Dolby Digital Plus and Dolby TrueHD (You
may need to use this feature when listening to
surround sound at low volumes.).
ON
DELAY
0ms
~
200ms
Some monitors have a slight delay during video
playback, so the soundtrack will be slightly
out of sync with the picture. By adding a bit of
delay, you can sync the sound to the video. The
delay can be adjusted within the range of 0 ms -
200 ms.
SW LEVEL
Off
~
-20 ~ 0dB Adjusts the sound level of the subwoofer.
2 HDmI SET
HDMI (HDMI Audio)
AMP
Specifies the routing of the HDMI audio signal
from the system (amp) or through to a TV or flat
screen TV. When THRU is selected, no sound is
output from the system.
THRU
CEC
OFF
Allows input selection of this receiver to be
interlocked with the operation of the connected
components. The CEC Control function may not
work depending on the connected component
and its settings.
ON
•
When the CEC Control is set to "ON", you can also use the ARC (Audio Return Channel)
function, enabling TV to send audio signals to this receiver via a HDMI cable. To use the ARC
function, TVs that support the ARC function of the HDMI 1.4 standards are required.
Note
Summary of Contents for S7 SOUND PANORAMA
Page 86: ...Memo ...
Page 87: ...Memo ...
