23
4. Handling of pump (Operating method)
○
After operating the tickler or discharging the fuel from the carburetor, wipe
away the spilt fuel immediately.
If not, the fuel may catch the fire.
(3) Position of throttle lever
When starting the engine initially while the
engine is cold, set the throttle lever
②
to
the “START” position.
(4) Turn the main switch
③
fully clockwise
to start the self-starter motor and start the
engine.
○
After the engine is started, set the
switch to “RUNNING” position.
○
When the engine is operating at the
“RUNNING” position, the battery is
charged by the charging circuit
incorporated in the firefighting pump.
(5) When starting firefighting pump by
recoil starter.
○
Pull the recoil starter handle until
it is felt a little heavy as shown in
the right Photo and then pull it
forcibly.
○
Be sure to operate with the battery connected even when starting the engine
manually.
If the engine is operated with the battery disconnected, the monitor lamp may
function incorrectly or fail.
Caution
Throttle lever
Caution
Summary of Contents for FK500-A
