Shield T3 60 – 500KVA User Manual
23
2.2
Unloading and Unpacking
2.2.1
Moving and Unpacking of the Cabinet
The steps to move and unpack the cabinet are as follows
:
1)
Check if any damages to the packing. (If any, contact to the carrier)
2)
Transport the equipment to the designated site by forklift, as shown in
Figure2-3
Transport to the designated site
3)
Open the top plate of the steel-edged wooden case with slotted awl and pier,
followed by sideboards (see
Figure2-4
Disassemble the case
4)
Remove the protective foam around the cabinet.