34 Shield T3 60 – 500KVA User Manual
Bypass input
N
A
B
C
Main input
N
A
B
C
Output
N
A
B
C
Battery input
N
+
-
PE
(c)
Connections terminals of
250kVA and 300kVA
(d)
Connections terminals of
400kVA and 500kVA
Figure2-9
Connections terminals
3)
Connect the protective earth wire to protective earth terminal (PE).
4)
Connect the AC input supply cables to the Input terminal and AC output supply
cables to the Output terminal.
5)
Connect the Battery cables to the Battery terminal.
6)
Check to make sure there is no mistake and re-install all the protective covers.
Attention
The operations described in this section must be performed by authorized electricians
or qualified technical personnel. If you have any difficulties, contact the manufacturer
or agency.
