8
BULB REPLACEMENT
Unplug the Main Adaptor
CAUTION: Only adults should replace
the bulb. Be sure that the unit is
unplugged before attempting bulb
replacement.
1. Turn off the projector and unplug the
power cable.
2. The projector and bulb can reach
high temperatures. Please allow the
projector to cool for 30 minutes after
last use before proceeding further.
3. Remove the screws on the light
bulb cover (see diagram).
4. Remove light bulb cover.
5. Ensuring that the bulb has
cooled down, use a dry cloth to
carefully remove the existing bulb.
4.5”
(11.4 cm)
6”
(15.2 cm)
©2010 INNOVAGE LLC
All Rights Reserved.
Project Name:
ProjectorS38_IM
Designer/Studio:
INNOVAGE
Revision:
