Parameter Description
Parameters
153
5.6
1
4-5 Terminal Input Signal (P.196~P.199, P.505)
P.196 “The setting corresponding to
the minimum current/voltage of
termianl 4-5”
P.197 “The setting corresponding to
the maximum current/voltage of
terminal 2-5”
P.198 “The
minimum input
current/voltage of 4-5 terminal”
P.199 “The
maximum input
current/voltage of 4-5 terminal”
P.505
“The bias rate
of 4-5
current/voltage signal”
Related parameters
P. 17
“
The selection of signal
across terminal 4-5
”
P. 80~P. 84 , P. 86
“
Multi-function terminals selection
”
P.39
“
The maximum operation
frequency of terminal 4-5
”
P.501
“
Function selection of terminal 4-5
”
Parameter
Factory setting
Setting range
Remarks
196
0%
-100%~100%
Refer to P.194
197
100%
-100%~100%
Refer to P.195
198
4mA
0~20
Refer to P.192
199
20mA
0~20
Refer to P.193
505
0%
-100%~100%
Refer to P.139
<Setting>
•
The setting of 4-5 terminal input current/voltage is similar to the setting of 2-5. And they also
have the same effect except that the terminal 4-5 can’t give the negative voltage and the
minimum input current is 4mA.
•
Please refer to 5.21 The Voltage Signal Selection across Terminal 2-5 and Target
Frequency (P.38, P.73) for the setting of the input current/voltage across terminal 4-5.
Note: operating the 4-5 terminal function mentioned above, you must flip the switch
SW2 to corresponding
position at first and make sure it matches the setting value of parameter P.17.
