Parameter Description
Parameters
193
5.9
6
Restoration of the Parameters to the Default Values (P.998
and P.999)
P.998 “Restoring all parameters to default values”
P.999 “Restoring some parameters to default values”
● Once P.998 is read-out (after the read-out, the screen will display
) and rewritten-in,
all the parameters will be restored to the default values
except P.21, P.90, P.188, P.189, P.285, P.286, P.292 and P.293
.
● Once P.999 is read-out (after the read-out, the screen will display
) and rewritten-in,
all the parameters will be restored to the default values
except P.21, P.90, P.188, P.189, P.190, P.191, P.192~P.195, P.196~P.199, P.285, P.286, P.
292, P.293,
P.300~P.312
、
P.320~P.326.
● After performing P.998 and P.999, the screen will display
, indicating that the
parameters have been restored to the default values.
Note: The parameter P.998 is only executable in the PU mode. For the flow chart of transferring operation
modes, please refer to 4.1.1.
