56
4. Parameter description
Parameter
P.14
＝
11
，
12
，
13
P.0
0
P. 3
P. 19
A
6
0.1
Output frequency
When P.14=11, the value of A is 9.3%; when P.14=12,
the value of A is 12.7%; when P.14=13, the value of A
is 16.1%.
（
Note 2
）
Note: 1. Refer to the picture above the form, if need the one point, set values of P.98
、
P.99, if need two points ,set
values of P.98
、
P.99
、
P162
、
P.163, if need three points, set values of P.98
、
P.99
、
P162
、
P.163
、
P164
、
P.165, like this set every last.
2. If you set value of P.14 from 5 to 13, the curve will invalid when the value of P.0 is larger than the value
of A, it will be equivalent to the cueve when P.14=0.
4.10
JOG mode (P.15, P.16)
P.15
“
JOG frequency
”
P.16
“
JOG acceleration/deceleration
time
”
●
In JOG mode, the output frequency is the set value of P.15, and the acceleration/deceleration time
is the set value of P.16.
Parameter
Factory setting
Setting range
Remarks
15
5Hz
0~400Hz
---
0~360s/
When P.21=0
16
5.00s
0~3600s
When P.21=1
PDF created with pdfFactory trial version
