8
6. Auto Power Off Function
The power is automatically cut when the balance is left unused* for about 5 minutes or more.
Effective usage of this function can reduce dry batteries consumption.
*The balance is considered to be unused when the following conditions (1) and (2) continue.
(1) Keys are not operated.
(2) No changes in the measured weight value amounting to “approx. 1g or more over a 0.5
second period” are detected.
NOTICE
This function is activated at the time of factory shipment.
6.1 Setting the Auto Power Off Function
(1) Press the [MODE] key 5 times from weight
display.
(2) The display shown on the right will appear.
(3) Press the [TARE] key.
(4) The balance will revert to weight display after the
display on the right is shown.
CAUTION!
The internal values of the balance are being revised while “SEt” is
displayed. Never turn off the power while “SEt” is displayed.
(5) When the Power Off function is activated, the
display will begin to flash approx. 10 seconds
before the power is about to be cut.
The display will stop flashing if either the keys are
operated or an item of about 1g or more is
weighed, in which case the balance will return to
normal weighing mode.