15
At the same time, the reference weight and
the “PCS” unit are registered on the [UNIT]
key. (Refer to “13. Switching Units”).
CAUTION!
The internal values of the balance are being revised while “SEt”
is displayed. Do not turn off the power while “SEt” is displayed.
- If the sample weight exceeds the
capacity of the balance, or the weight of a
piece of the sample is smaller than the
minimum increment, “
r E4
” is displayed
and the display reverts to the unit before
menu selection.
- Press the [ON/OFF(BREAK)] key to
abort piece counting settings. “
Abort
” is
displayed and then it reverts to the
display before menu selection.
Aborting is not possible while “
SEt
” is
being displayed.