29
Selecting the
baud rate
(1) Press the [MODE] key to display “
iF
” (see “5.
Menu Selection”).
(2) Press the [TARE] key to display “
bPS
”.
(3) Press the [TARE] key.
(4)
“
300
” is displayed. The display changes in the
following order by pressing the [MODE] key: 300
-> 600 -> 1200 -> 2400 -> 4800 -> 9600 ->
300… The currently selected baud rate is
displayed with the stability mark.
(5) Select the desired baud rate and press the [TARE] key.
Selecting the
parity
(1) Press the [MODE] key to display “
iF
”.
(2) Press the [TARE] key to display “
bPS
”.
(3) Press the [MODE] key to display “
Prty
”.
(4) Press the [TARE] key to display “
EvEn
”.
(5) The display changes in the following order by
pressing the [MODE] key:
EvEn
->
odd
->
non
->
EvEn
…
The currently selected parity is displayed with the stability mark.
(6) Select the desired parity and press the [TARE] key.
* The data length becomes 7 bits if “
EvEn
” or “
odd
” is selected for the parity.
Selecting the
stop bit
(1) Press the [MODE] key to display “
iF
”.
(2) Press the [TARE] key to display “
bPS
”.
(3) Press the [MODE] key to display “
StoP
”.