55
Symptom
Cause / Possibility
Remedy
The battery cannot be
removed.
Contact the place of purchase.
The battery cannot be
inserted.
Contact the place of purchase.
Fluid is coming out from the
battery.
Contact the place of purchase.
An abnormal odor can be
detected.
Stop using the battery immediately and
contact the place of purchase.
Smoke is coming out from
the battery.
Stop using the battery immediately and
contact the place of purchase.
Lights
Symptom
Cause / Possibility
Remedy
The front light or the tail
light does not illuminate
even when the switch is
pressed.
The E-TUBE PROJECT settings may be
wrong.
Contact the place of purchase.
Cycle computer
Symptom
Cause / Possibility
Remedy
The cycle computer is not
displayed when you push
the battery power button.
The amount of battery charge may be
insufficient.
Recharge the battery, and then turn the
power on once more.
Is the power turned on?
Hold down the power button to turn on
the power.
Is the battery charging?
The power cannot be turned on while the
battery is mounted on the bicycle and
being charged. Stop charging.
SC-E6010
Is the cycle computer correctly installed to
the bracket?
Install the cycle computer correctly while
referring to "Installing and removing the
cycle computer".
Is the electric wire connector correctly
installed?
Check to see if the connector of the electric
wire connecting the motor unit to drive
unit is not disconnected. If you are not
sure, contact the place of purchase.
A component that the system cannot
identify may be connected.
Contact the place of purchase.
SC-E6010
The system does not start
up when you press and hold
the cycle computer power
button for 2 seconds.
Did you use the cycle computer in, or
expose it to, low temperatures for an
extended period?
The cycle computer may become unable to turn
on if used in, or exposed to, low temperatures
for an extended period. Turn it on by pressing
the power button on the battery. If it still does
not turn on, consult a dealer.
Is the cycle computer correctly installed to
the bracket?
Install the cycle computer correctly while
referring to "Installing and removing the
cycle computer".
Summary of Contents for STEPS E8000 Series
Page 2: ......
