150
Appendix D - Glossary.
Audio type CD-R or CD-RW disc.
When a CD-R or CD-RW disc is intended for use as an audio disc, an
audio application code is recorded onto the blank disc during
manufacture. This identification code makes it possible to
differentiate between audio/music type CD-R or CD-RW and PC type
CD-R or CD-RW media. This prevents you from recording in Music
CD format, even when trying to record using an audio CD-R or CD-
RW recorder.
Automatic gain control (AGC).
This is a feature that allows the recording level to be adjusted
automatically. When the level is low, it will be increased by 6dB.
When the level is high, it will be reduced to below 3dB.
Auto section setting.
PLEXTALK contains a setting for automatic section division. When
input is silent for the specified number of seconds, PLEXTALK
automatically creates a section at that point. To use this function, set
the required time in the Custom recording settings. Select "No
setting" if you do not wish to use this function.
Background noise level of input sound.
With PLEXTALK, this is a way of specifying a noise level other than
the voice or music that is being input. For example, if inputting sound
from a tape, the tape hiss can be specified as noise.
Bit rate.
Bit rate is a measure of data transmission speed. It refers to the
number of bits of data transmitted in one second.
CD Extra.
This is a CD format. It records the first session as a music track and
the second session as an XA Mode 2 data track. It is also referred to
as "CD-Plus" and "Enhanced CD".
Summary of Contents for PTP 1
Page 1: ...2 PTP 1 User s Guide 2008 Shinano Kenshi Co Ltd...
Page 159: ...160 Index...
