36
adjusting the level manually, press the Up key to increase the
level or press the Down key to decrease the level.
When the recording level has been set correctly, press the
Record key a second time and recording will start.
Press the Record key again at any time and the recording will
be paused.
Restart recording by pressing the Record key again.
To stop recording, press the Play/Stop key.
NOTE: Each time you start recording, a new section is automatically
created at the end of the existing recording. You do not need to
navigate to the end before recording new material.
NOTE: At any time in recording stand by, recording pause or during
recording, you can switch off and on the recording monitor by
pressing the Bookmark key. This allows you to listen to how the
recording sounds whilst recording. When recording from the built in
microphone or an external microphone, you must be using
headphones for this feature to work.
8.4. Editing a DAISY recording.
The editing feature can be used during the recording process or
afterwards. The insertion of heading is available for the editing
feature.
To insert a heading during recording, press the Goto key once.
In recording pause, press the Goto key to insert a heading. In
recording pause, if you have previously pressed the Goto key, press
the Goto key again to cancel the heading you had just created.
After completing the recording, to insert a heading, go to the location
where you want to insert the heading or page and then select
appropriate option from menu. PLEXTALK will then ask you to
confirm the position. Use the Number 4 or 6 key to adjust the position
back or forward by 0.1 second increments. Press the Enter key at the
location where you want.
批注
[
藤森
4]:
取り消し方法確認
Summary of Contents for PTP 1
Page 1: ...2 PTP 1 User s Guide 2008 Shinano Kenshi Co Ltd...
Page 159: ...160 Index...
