16
•
User's Guide in Microsoft Word format - this version of the
guide can be found in a folder on the User's Guide CD called
"Manual". The file name is "PTX1 Pro Users Guide.doc".
•
User's Guide in text format - this is a plain text version of the
User's Guide. this version of the guide can be found in a folder
on the User's Guide CD called "Manual". The file name is
"PTX1 Pro Users Guide.txt".
5.4. Description of the unit.
This section describes the physical look of the PLEXTALK and the
layout of the keys and other controls to enable you to locate them
when referred to in later chapters. The names and main purposes
are also detailed here.
Holding the unit carefully, take a few moments to locate the top and
bottom surfaces. The top has 27 rubber keys on it whereas the
bottom has only 5 rubber feet, four of which are near to the corners
and one which is the long straight foot. When you have found the
bottom of the unit, place the unit carefully down, on the five rubber
feet, on a flat surface in front of you.
Locate the perforated surface of the speaker grill of PLEXTALK.
Keep the feet downwards and rotate it until the speaker grill is upper
right from you. The PLEXTALK should now be set up in its normal
operating position. You can confirm this by feeling the longest side is
nearest to you. There should be a narrow, but noticeable, straight dip
in this edge. It is the CD slot.
5.4.1. Top surface.
PLEXTALK has 27 rubber keys on the top surface. These are
grouped in 5 blocks - a column of 4 keys on the left side, a
rectangular block of 12 keys in the centre, a row of 3 keys below the
rectangular block, a row of 3 keys above the rectangular block and a
column of 5 keys on the right side.
