76
To move a Text File from a media to another media, do the following:
•
If you use SD card or USB media, insert SD card or USB
media with sufficient free space. Ensure that SD card is
unlocked.
•
Navigate, on the source media, to the Text File that you wish
to move.
•
Press the Number 9 key once to access the move feature.
•
PLEXTALK will say, “Select a target media.” Press the
Number 4 or 6 key to choose the target media. Then press the
Enter key or Number 8 key to confirm.
•
PLEXTALK will ask you to confirm that you wish to continue
with the move. Press the Enter key or Number 8 key again to
continue or the Cancel key to abort.
•
If you choose to continue, the backup process will start.
PLEXTALK will announce when the backup is complete.
Note:
If you wish to cancel the backup process whilst it is running,
press the Cancel key.
15. Other useful features.
This chapter details how to check the system properties and how to
set the “Skippable” settings.
15.1. Checking system properties.
In the event of requiring to contact your local agent, you may be
required to quote the system version and/or the PLEXTALK serial
number. The system version refers to the version of the internal
firmware and the serial number is the unique identifier for your
PLEXTALK.
If you require to find out the system version or the serial number of
your PLEXTALK, this is easily done as follows:
