High
Low
Auto
Cloth-dry
Waterfull
In standby state press the Power button to start, and during operation
of the dehumidifier press the Power button to shut down. For initial
startup the default is low wind, the display show the environment
temperature and the default set humidity is RH50%. If the dehumidifier
is not energized for the first time, after startup the state is kept the
same as that before shutdown. The LED is closed, only power light is
illuminated when standby.
In boot state or regular boot, press this button to chose autumatic
dehumidification or cloth dry function , each function have 2 second
confirmation delay time.
In boot state, press this button, the LED light and blink. In blink time,
press button to set the time of timing. press
buttom to add/reduce one hour . Keep pressing the button
to add/reduce time as well. The maximum is 24 hour, the minimum is
1 hour. LED blink 5 time to confirm the timing set. Press the timer
button again to reset the timing time in timing status.
Press button( each press for 5%RH to select humidity
from 30-80%RH only in automatic dehumidification.
Press this button to choose fan speed, high-low-high, only valid in
automatic dehumidification. Keep pressing fan speed button for 5s
to start inside dry.
9
