5.You can also press to change the fan speed to HIGH or LOW. The
indicator light will show the setting you have selected. A higher fan speed will
result in quicker moisture removal.
6.
Then to run the dehumidifier for a preset amount of hours, press ."0"
blinks on the display. Set the time you wish the appliance to operate between
1 and 24 hours. And you can set time to turn on this machine by pressing this
button in standby.
8.Before storing the unit , pls dry inside of the dehumidifier by
pressing .This will prevent mold from forming during storage.
Auto Shut Off
When the bucket is full and/or the humidity setting is reached, the
dehumidifier will be shut off automatically.
Wait 3 minutes before resuming operation
To avoid any damage to the dehumidifier, the dehumidifier will not start
operation following a complete cycle until after three (3) minutes. Operation
will automatically start after three (3) minutes.
Auto Defrost
When frost builds up on the evaporator coils, the compressor will cycle off
and the fan will continue to run until the frost disappears.
Auto-Restart
If the dehumidifier shuts off unexpectedly due to power being cut, the
dehumidifier will restart with the previous function setting automatically
when the power resumes.
Note: SMART FUNCTIONS
7.If "Water full" lights up and the display shows "FL", the water tank needs
to be emptied (see "Removing Collected Water")
．
After reinstalling the
emptied water tank, the dehumidifier restarts automatically after three
mins.
8
