5
BP3503A
Throttle
Trigger
Gearcase
Brushcutter
Blade
Outer Tube
Handle
Fuel
Tank
Cylinder
Cover
C35 BRUSHCUTTER
Cutting
Attachment
Shield
Ignition
Switch
Spark Plug
Throttle
Assembly
Flex
Cable
Air Cleaner
Muffler
Unit Description
WARNING!
Do not make unauthorized modifica-
tions or alterations to this unit or its
components.
Using the accompanying illustrations
as a guide, familiarize yourself with this
unit and its various components. Un-
derstanding this unit helps ensure top
performance, long service life, and safer
operation.
DESCRIPTION
Figure 3
Engine Model ....................................................... SK35F Engine
Dry Weight
(less cutting attachment and guard) .................21.3 lbs./9.7 kg
Type ....................................2-cycle, vertical cylinder, air cooled
Bore x Stroke ........................................................36mm x 33mm
Displacement ...................................................33.6.cc/2.1 cu. in.
Maximum Power Output ................ 1.8 hp @ 7500 RPM (min
-1
)
Operating RPM Range .........................4,500-7,000 RPM (min
-1
)
Transmission Type ...................... Automatic centrifugal-clutch
through bevel gears
Fuel/Oil Ratio .............................................. 50:1 with Shindaiwa
Premium 2-cycle mixing oil
Fuel Tank Capacity ..........................................40.6 oz./ 1200 ml
Carburetion ............................................................. TK, float type
Ignition ........................... Fully electronic, transistor controlled
Spark Plug ............................................................. Champion CJ8
Air Cleaner .............................................................Foam element
Starting Method .....................................................Recoil starter
Stopping Method ................................................... Toggle switch
Specifications
Prior to Assembly
Before assembling this product, please
make sure you have all the components
required for a complete unit:
Engine Assembly (Powerhead).
Outer Tube Assembly.
Cutting Attachment Shield.
Handle.
IMPORTANT!
The terms “left,” “left-hand,” and “LH”:
“right,” “right-hand,” and “RH”; “front”
and “rear” refer to directions as viewed
by the operator during normal operation
of this product.
Specifications subject to change without notice
IMPORTANT!
BP35 brushcutter units do not have
the spark arrester installed in the muf-
fler. Before placing the brushcutter in
service, check local, state and federal
regulations to determine if a spark
arrester is required in your area. See
page 15 for details.
Tool bag including: Hex wrenches
and a combination spark plug wrench
and cutting attachment shield mount-
ing hardware.
Carefully inspect all components for
damage.
Summary of Contents for BP35
Page 19: ...19 NOTES ...
