OPERATION
LE262
24
X7502341501
© 03/2019 ECHO Inc.
1.
Before edging, water the area to
soften the ground to make
edging easier.
2.
Before edging, check the area
and remove all obstacles and
objects that could be thrown.
3.
Plan to edge regularly to make it
easier to keep a neat edge and to
avoid having to make more than
one pass.
Note: Blade depth may have to
be adjusted due to
differences in height
between the hard surface
and the top of the grass.
Never adjust blade height with engine running, otherwise
serious personal injury may result.
4.
Loosen adjustment knob and
adjust the blade's depth of cut to
produce a fine cut between
sidewalk and grass using a
minimum blade depth, usually
with about 13 mm (1/2 in.) of the
blade into the ground. Tighten
adjustment knob.
5.
Before edging, plan your
direction of travel so that the unit
will always be positioned on your right side and so that you walk on a
hard surface whenever possible.
6.
Hold edger as shown.
