OPM-10V-S User Manual
①
Wavelength range
：
A standard working wavelength λ is defined from λ min to λ max, and the light power meter designed in
this wavelength range can work under specified parameters.
②
Power Measurement Range
：
The range of maximum light power can be measured according to the specified index
。
③
Power Uncertainty
：
The error between the test result of a certain light power and the standard optical power test
。
5.
Shipping list
①
OPM-10V-S mini red light meter -------------------------------------------------1
②
Operation instruction ----------------------------------------------------------------1
③
7 AAA 1.5 V batteries ---------------------------------------------------------------3
④
Certification ----------------------------------------------------------------------------1
6.
Function description
6.1 Diagram
The whole diagram of OPM-10V-S
6.2 Function
①
OLED display screen
OLED displays the measured optical power values in the form of dB, dBm, mW, uW, nW. Set
wavelength of 850nm, 1300nm, 1310nm, 1490nm, 1550nm and 1625nm. The current working state, red light working mode,
etc.
②
Key
The OPM-10V-S can be started by pressing the
key to the OLED display, and the long press of the key can
be turned off when it is switched on (after the boot is 1 second).
③
λ Key
The
λ
wavelength selection key, pressing the key, can select different wavelengths, 850nm, 1300nm, 1310nm,
1490nm, 1550nm, 1625nm wavelength, which will also be displayed on OLED.
④
Fn Key
The key can switch the unit dBm/dB/mW of the optical power meter. Press this button to switch the red light
on/blink/close. After the red light is turned on, the OLED screen will display the red light opening icon
。
⑤
Ref Key
Measuring the value of optical power relatively at the setting wavelength.
7.
Instructions
7.1
Turn on/off
①
Press the
key until the screen shows the version number
，
then release the key and enter the red light meter
measurement interface.
②
After the long press the
key, the screen is not displayed and the meter is turned off.
7.2
Absolute optical power measurement
battery electric power sign
Red light open/scintillation mark
2
4
Wavelength display
5
Automatic shutdown mark
3
1
OPM interface
Red light source interface
dust cap
