11(40)
1.4 Safety Regulations
Please abide by the safety guide when you operate the machine so as to
prevent damage of the machine and personal injuries.
Attention!
All electrical components should be installed by qualified electricians.
Turn off main switch and control switch during repair and maintenance.
Warning! High voltage!
This mark is attached on the cover of the control box.
Warning! Be careful!
Be more careful when this mark appears.
Transportation and Storage of the Machine
Transportation
1) SAL series hopper loader are packed in paper cartons. Handle with care
when to move the machine by hands.
3) Do not rotate the machine and avoid collision with other objects during
transportation to prevent improper functioning.
4) The structure of the machine is well-balanced, although it should also be
handled with care when lifting the machine for fear of falling down.
5) The machine and its attached parts can be kept at a temperature from -25
℃
to +55
℃
for long distance transportation and for a short distance, it can be
transported with temperature under +70
℃
.
Storage
1) SAL series hopper loader should be stored indoors with temperature kept
from 5
℃
to 40
℃
and humidity below 80%.
2) Disconnect all power supply and turn off main switch and control switch.
3) Keep the whole machine, especially the electrical components away from
water to avoid potential troubles caused by the water.
4) Plastic film should be used to protect the machine from dust and rains.
Working Environment
Summary of Contents for SAL-330
