60(63)
screen board, tightly hang up the spring in the tower.
6) Unscrew the diffuser with a wrench and remove the adsorbent.
7) Replace the adsorbent and install the diffuser. (adsorbent selection: with a
dew-point of -40
℃
,
Ф
3~5mm aluminum trioxide is suggested, while the
dew-point is -70
℃
,
Ф
3~5mm13x molecular sieve can be adopted.)
8) Loosen the spring of the M6
×
100 screw and make sure the adsorbent is
pressed out.
9) Install the dryer step by step.
10) Use soap water for air tightness test. The qualified machine has no leakage.
Note: leakage will lead to pressure and dew-point increase.
6.4.5.9 Filter Element Replacement
1. Filter element replacement steps (in LN24-0.5/1A and LN24-1/1A):
1) Release the pressure in the filter.
2) Dismantle the automaticsewer valve (if there has one).
3) Pull down the locating block and unscrew the filter cup shield.
4) Take down the filter cup.
5) Firmly grasp the filter element and unscrew the screw. The hanger bolt and
filter element is integrated.
6) Take out the old filter element and put it away according to the relevant
regulations for environmental protection.
7) Only soap water or pure water can be used to clean the inner filter cup.
8) Tighten the screw and install the new filter element.
9) Check whether the O ring on the bottom of the filter cup is in good
condition and then put the filter cup in the filter cover.
10) Put on the filter cup shield and rotate, make the locating block drop into
the slot.
2. Filter element replacement steps (in LN24-2/1):
1) Release the pressure in the filter.
2) Dismantle the automaticsewer valve (if there has one).
3) Unscrew the filter with pulley wrench or spanner.
4) Unscrew and dismantle the hanger bolt which is used to locating the filter
element.
5) Take out the old filter element and put it away according to the relevant
regulations for environmental protection.
Summary of Contents for SDL-U Series
