34(49)
4.6 User Menu
Press the button
on the main screen to enter the User Menu, which
includes five items as the table below:
No. Menu Item
Funtion
Remark
1
User Setting
To set the user parameters
-
2
Unit Status
To display the current operating
status of the unit
--
3
Fault Record
Allowing the query of the last 10
faults
Press
for 2s to
clear the fault history.
4
Machine Set
To set language, backlight, time and
so on.
--
5
Temp Query
To query all the temperature value
It is not display these item If
measure the water temperature only.
4.6.1 Parameter Operation
For the modification operation of parameter value, the user
’
s modification of
setting temperature will be described as an example.
4.6.2 User Setting
All the parameters in user settings please refer to following table:
No.
Parameter
Name
Factory
Default
Setting Range
Remark
1
Lock Temp.
No
Yes ~ No
Yes: the [Set Temp.] can not be modified on
the main screen when locked.
No: the [Set Temp.] can be modified on the
main screen.
2
Set Temp.
20.0
℃
7.0~25
℃
Setting range is limited by the manufacturer
parameters [max. Temp.], [min. Temp.].
3
On/Off Mode Local
Local / Local +
Remote / Remote
Local: the unit can only start and stop locally.
Local + Remote: the start and stop of the unit
can be controlled both locally and remotely.
Remote: the unit can only start and stop
remotely.
Summary of Contents for SIC-A-R2
