46(49)
Attention!
When the machine stops or be stored under 0
℃
, the pipeline should be
disconnected and force the water in the condenser to come out by lifting
the front part of the machine.
B. Air-cooled Series
SIC-A-R2 series water chiller use the air cooled fin style condenser which
installed openly, in the using time, it is hard to avoid any dust and sundries,
which will influence the heat emission effect, so it is necessary to clean the
condenser at fixed periods in order to keep its working performance. Use brush,
dust catcher or compressed air to clean the wings and copper pipe. Then use
the low pressure water to cascade the tray pipe. Note: do not let the water to
cascade on the surface of the fan motor.
Attention!
Do the cleaning work every half-year in the environment with little dust,
but you must do the work every month in the environment with a great
deal of dusts, and under the severe environment you had better see the
situation to do the work.
6.2.2 Evaporator
SIC-R2 series water chiller adopts tube-in-shell condenser which may have
incrustations piled up in the inner side of its heat pipe or sundries caused by bad
water treatment. All these will influence the heat emission effect, so it is
necessary to clean the condenser at fixed periods to ensure its good working
performance.
Clean the evaporator use the method of cleaning the condenser, and the
incrustation will discharged from the water outfall.
Summary of Contents for SIC-A-R2
