44(49)
6. Maintenance
6.1 General
Please observe the prescribed maintenance intervals. Proper maintenance ensures
trouble-free functioning of the robot. Proper maintenance is necessary in order that the
warrantee be fully enforceable.
Maintenance should be performed by qualified personnel only.
Maintenance and responsibility for safety equipment becomes the responsibility of
the system operator once he accepts the robot.
Please note, in particular, that safety instructions marked with a
must be
observed according to regulations so that fully functionality of this equipment can be
guaranteed.
6.2 Lubrication Requirements
Remove the old grease from the guide shafts and scraper rings of the bearing using a cloth.
Then apply the new grease to the guide shafts using a brush.
As well as all roller bearing greases according to DIN 51825. Lubrication NGL12 observes to
DIN51818 standard.
Recommended Lubricants:
MANUFACTURER
TYPE:
SHELL
ALVANIA G2
DARINA GREASE 2
MOBIL
MOLYKOTE LONG TERM 2PLUS
MOBILGREASE 28
MOBILUX 3
ESSO
UNIREX N3
KLUBER
ISOFLEX NBU 15
ISOFILEX NCA 15