7.1
Remove Model
Post Processing
7
1
2
3
A few tools in the accessory box are for the cleaning of platform. Please avoid protrusion of
the platform surface. As it would press the resin tank film during printing process. And may
damage the film or even the screen.
After the model printing is finished, lift and suspend the printing platform for 5 minutes.
Thus, the residual resin material attached on the surface of the model drops back to
the resin tank.
Use the PET sheet provided in accessories to scrap off the resin material on the build
platform in an oblique manner.
Pull up the handle, take out the build platform, and place the platform sideways on
the bench.
Remove the part with the tool and be caution when using sharp tools.
19