Post Processing
7
7.2
.
2
Clean Build Platform
1
2
3
Use the brush with wet alcohol to clean
up the residual resin on the surface of
the build platform if necessary.
Dry the surface of the build platform with
a paper towel, and dry in a ventilated place
before reuse.
A few tools in the accessory box are for the cleaning of platform. Please avoid protrusion of
the platform surface. As it would press the resin tank film during printing process. And may
damage the film or even the screen.
7.2
.
1
Clean Model
7.2
Cleaning
Put the printed parts into the bath of alcohol (concentration of
75% or above). And clean manually for about 30 seconds.
You can use cleaning machine as well.
Dry the model with high-pressure air.
Optional:
Alcohol 75%
Use the putty knife to clean up the model
residue on the build platform.
20