Safety
1
1.1
Material Contact
The printing material of AccuFab printer is photo-polymerized resin material independently
developed by SHINING 3D. The resin is stable, safe, and no substances harmful to the
human body found in the test, but direct contact with skin may cause adverse irritating
reactions. Operators should follow the Material Safety Data Sheet (MSDS) instructions.
And operators should wear nitrile disposable gloves when in contact with material.
Eye contact: Flash the eye with water for at least 15mins.And seek medical attention.
Ingestion: Induce vomiting and seek medical attention.
Skin contact: Take off contaminated clothing and wash the skin area thoroughly with
soap and water.
Do not touch the liquid material by hand. Please refer to the latest Material Safety
Data Sheet (MSDS) or call local authorities for the material handling hazard
and treatment.
Note:
Warning:No smoking, eating, or drinking in the workplace. Keep the material properly
and keep away from the children.
1.2
Ultraviolet Light
During the printer and Fab-cure operation, Ultraviolet light with a wavelength of 405 nm
will be emitted, which is may bring damage to your eyes. Please avoid direct contact.
A safety interlock is enabled to avoid printing when the cover is open.
Ethanol is a flammable and explosive chemical. Please store in a cool and ventilated
environment and keep the bottle cap of the container closed. Keep away from children.
Ethanol is recommended to clean printed part (Alcohol concentration of 75% or above)
1.3
Ethanol
Wear disposable gloves when clean part surface with ethanol. Avoid direct contact.
1.4
Sharp Tools
AccuFab 3D printer equipped with a set of accessories including sharp tools such as
flat-headed tweezers, cleaning shovels, and utility knives. Personal safety protection is
required when using these tools.
1.5
Electromagnetic Interference
Electromagnetic, produced by AccuFab printer and Fab Cure during operation, has passed
CE/FCC standard test and is complied with Class A digital device limits, which will not
cause harm to the human body.
1