AccuFab-L4D & L4K_User Manual_V3.2.20_June 2021
19
⚫
:
Return the Z axis coordinate of the selected model to zero after triggering.
⚫
:
The selected model can return to the center position of the platform after
triggering, and the XYZ coordinate value will return to zero.
⚫
:
The selected model can be reset and return to the platform center position
after triggering, with XYZ coordinate values returning to zero.
Rotate the Model
⚫
: Function trigger. Display the spatial angle coordinates of the model in the current build platform,
and the value changes with the change of angle in use.
➢
The XYZ coordinate values are based on the initial loading position of the model, and the initial
values are (0.00°,0.00°,0.00°).
➢
Input other angle values on the XYZ axis coordinate value box, and press the “ENTER” key to change
the model angle accordingly.
⚫
: It can reset the selected model's rotation operation after triggering and
Note:
After the model is imported into the software, if the preview color is red, it indicates that it is beyond
the printing range. Therefore it needs to be moved to a suitable position on the printing platform by
using the 'move' function until the preview color is blue after moving, as shown in the figure:
Before adjustment After adjustment