AccuFab-L4D & L4K_User Manual_V3.2.20_June 2021
36
5.4.
Striping Support
The cured model support is easy to be peeled off and not easy to destroy the model surface. Select tools such
as a putty knife, utility knife to peel off the support on the model, or peel manually.
Operation description
No.
Description
No.
Description
①
Before support stripping.
②
Remove support manually.
③
Support stripping finished.
—
—
Note
:
⚫
Be careful to prevent scratches when using sharp tools such as utility knives.
⚫
Remove the build platform before replacing the resin tank to avoid the resin polluting the optical lens.
⚫
The exposure time parameters of different printing materials are different.
⚫
Adhere the utility knife to the build platform to avoid the deformation of the model when taking off the
model, and clean the platform with paper towels after cutting.