15
4. Functions
4.1 Setup and Checking of Functions
1
Invoking the function
Press and hold down the
Function key until the indicator
changes to “Func
,” then release
the key.
The function setup mode is
activated, and the first item,
[1. b.G. 1](Bar graph) appears.
(See “4.2 Description of Functions”
on page 13.)
2
Selecting the next item
Press the Function key.
The indication changes to the next
item, [3. A.0 1] (Auto zero).
3
Selecting an item
Pressing the Function key
advances the function items at the
rate of one item per press.
4
Changing the content of an item
Select the item to be changed with
the Function key.
Each press of the Zero/Tare key
changes the digit on the right end.
Select the desired one.
5
Terminating the function selection
Press the Set key.
The balance terminates the function
setup and returns to measurement
mode.
