13
13
SETUP CMT-240-K
4. Setup
4.1 How to open System Mode Main Menu display
Press the upper left and lower right corners of the display simultaneously after turning on the Touch panel
monitoring unit CMT-240-K [Fig. 4.1-1].
This brings up the System Mode Main Menu [Fig. 4.1-2] of the CMT-240-K.
Note:
From any display, the System Mode Main Menu can be opened by pressing the upper left and lower right
corners of the display simultaneously.
Caution
Press only the “
System Setup
” and “
User Mode”
buttons on the System Mode Main Menu.
If this is not done, the unit may not work properly.
[Fig. 4.1-1]
[Fig. 4.1-2]
4.2 System Setup
Pressing the “System Setup” button on the System Mode Main Menu display [Fig. 4.1-2] opens the
System Setup display [Fig. 4.2-1].
Caution
• Press only the “
RS485 Setup
” and “
Display Control
” buttons on the “System Setup” display.
If this is not done, the unit may not work properly.
• Clock Setup is available on the System Setup display. However, if the power supply to the unit is turned
off, the value will return to its initial setting.
System Setup
System Check
Up/Download
User Mode
System Mode Main Menu