28
28
OPERATION CMT-240-K
h
PID Auto-tuning Perform/Cancel selection display
Sets PID Auto-tuning Perform or Cancel for all channels.
For the details of PID auto-tuning, refer to the instruction
manual for C series.
During AT performing, other settings cannot be performed.
Do not perform Auto-tuning for the channels
whose control is ON/OFF or PD action.
h
Alarm 1 action form selection display
Selects Alarm 1 action form for all channels.
Action form: See [Table 5.4-2] below.
For alarm action drawing, refer to the instruction manual
for the C series.
[Table 5.4-2]
Alarm action form
Character
No alarm
- - - -
High limit alarm
H
High limit alarm with standby
H W
Low limit alarm
L
Low limit alarm with standby
L W
High/Low limits alarm
HL
High/Low limits alarm w/standby
HL W
High/Low limit range alarm
WID
High/Low limit range alarm w/standby
WIDW
Process high alarm
PH
Process high alarm with standby
PH W
Process low alarm
PL
Process low alarm with standby
PL W
h
Alarm 2 action form selection display
Selects Alarm 2 action form for all channels.
Action form: See [Table 5.4-2] above.
For alarm action drawing, refer to the instruction manual
for the C series.