background image

INSTALLATION

1. Locate a suitable place to install the fan, for example, on the 

dashboard or doorpost. Be sure the fan can oscillate freely.

2. Using the fan’s bracket plate as a template, drill two 1/8” holes 

in the mounting location and install the bracket plate with two 

provided self tapping screws.

3. Secure the bracket to the bracket plate with screw attached.

4. Attach the switch box to a metal (non-flammable) surface.

OPERATION

1. Oscillation Lever: The fan oscillates if this lever is pulled down. 

To stop oscillation, push the lever back up.

2. Variable Shift Head Oscillation Mechanism: To reset the angle 

of the fan, turn the head to desired position. Oscillation will 

then continue at the new angle.

3. Tilt Adjustment Screws: To change the degree of upward or 

downward tilt of the fan, loosen the screws and set the head 

to the desired angle, then re-tighten the screws.

4. Power Switch: To turn the power on, push the switch on the 

switch box to FAST for high speed, SLOW for low speed.

MAINTENANCE

Periodically  inspect  the  Car  Fan  for  cracked  or  worn  wiring. 

Ensure that all parts move freely.  Clean the fan with a wet rag. 

Do not use gasoline, benzine, thinners or other volatile solvents. 

Lubrication is not necessary, as a special oil-less metal is used. 

2

3

! SAFETY MESSAGE !

No alteration shall be made to this device. Only attachments 

and / or adapters supplied by the manufacturer shall be used. 

• Leer, comprender, y seguir las instrucciónes antes de utilizar

  el aparato.

• El manual de instrucciónes y la información de seguridad 

  deben estar comunicado en lengua del operador antes del 

  uso.

• No seguir estas indicaciónes puede causar daños

  personales o materiales.

     ADVERTENCIA

!

oscillation lever

tilt adjustment screw

bracket

bracket plate

Study, understand,  and  follow  all  instructions  provided  with 

and on this device before use. Only plug into a 12V cigarette    

lighter receptacle. Switch box gets very hot when in use. Do 

not attach to flammable material. Do not block air vents. Only 

use fuse recommended by the vehicle owner’s manual. Do not 

position the power cord where it may become damaged. Keep 

out of the reach of children. Failure to heed these markings 

may result in personal injury and / or property damage.  

!

  WARNING

Reviews: