SHINPO SPRW, Operation Manual

SPRW_ENGLISH _101

8 

6.  Pour water into the Drain Pan 

▼ 

Appropriate amount is approx 1 liter. 

▼ 

Do not splash water on the Burner. 

▼ 

If water accidentally splashes on the holes of the Burner, remove the Burner and wipe it dry with a 
piece of cloth. 

▼ 

If the holes are clogged with water or other substances, gas may reverse its flow at the Gas Intake 
of the burner and burn within the appliances. 

▼ 

Make sure gas is burning before you release the knob. 

7.  Place the Radiant Plate Stand on the center of the Drain Pan. 

8. Mount the Radiant Plate onto the Radiant Plate Stand. 

9.  Mount the Top Ring onto the Drain Pan. 

Note: 

▼ 

The Top Ring is designed to fit inside the Drain Pan. 

▼ 

Rotate the Ring a couple of times and make sure the Top Ring is sitting squarely and level on the Drain 
Pan. 

▼ 

If the Top Ring is not sitting squarely or tilted, smoke from cooking may not discharged properly or food 
may not be cooked evenly. 

10. Place the Grill Plate using Grill Plate Gripper. 

▼ 

Use Grill Plate approved by us. 

11. Check the following again before use. 

▼ 

All the parts are installed correctly. 

▼ 

Drain Pan holds an appropriate amount of water. 

★ 

Pot Cooking 

▼ 

Remove the Top Ring and mount the Trivet(Sold separately) on the Drain Pan. 

▼ 

Use Trivet approved by us. 

Drain Pan 

Inner Casing

Burner

※

Pour the water up to this level

Water