background image

5

Retain Instructions -

 The safety and operating instructions should be retained for future reference.

Heed all Warnings-Comply with all warnings on the video product and in the operating instructions.

Polarization - 

Some video products are equipped with a polarized alternating -current line plug. 

This plug will fit into the power outlet, try reversing the plug. If the plug still fails to fit, contact your 
electrician to replace your obsolete outlet. To prevent electric shock, do not use this polarized plug 
with an extension cord, receptacle, or other outlet unless the blades can be fully inserted without 
blade exposure. If you need an extension cord, use a polarized cord.

Power Sources -

 This video product should be operated only from the type of power source 

indicated on the marking label. If you are not sure of the type of power supply to your home, 
consult your video dealer or local power company. For video products intended to operate from 
battery power, or other sources, refer to the operating instructions.

Overloading -

 Do not overload wall outlets or extension cords as this can result in a risk of fire or 

electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked 
wire insulation, and broken plugs are dangerous, They may result in a shock or fire hazard. 
Periodically examine the cord, and if its appearance indicates damage or deteriorated insulation, 
have it replaced by your service technician.

Power-Cord Protection -

 Power-supply cords should be routed so that they are not likely to be 

walked on or pinched by items placed upon or against them, paying particular attention to cords 
at plugs, convenience receptacles, and the point where they exit from the video product.

Ventilation -

 Slots and openings in the case are provided for ventilation to ensure reliable 

operation of the video product and to protect it from overheating. These openings must not 
the blocked or covered. The openings should never be blocked by placing the video product 
on a bed, sofa, rug, or heat register. This video product should not be placed in a built-in 
installation such as a book case or rack, unless proper ventilation is provided or the video product 
manufacturer’s instructions have been followed.

Attachments -

 Do not use attachments unless recommended by the video product manufacturer 

as they may cause hazards.

Water and Moisture -

 do not use this video product near water for example, near a bath tub, 

wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool and the like. 

Caution:

 Maintain electrical safety. Powerline operated equipment or accessories connected to 

this unit should bear safety certification mark on the accessory itself and should not be modified 
so as to defeat the safety features. This will help avoid any potential hazard from electrical shock or 
fire. If in doubt, contact qualified service personnel.

Summary of Contents for SH-HDST01

































Reviews: