CONTENTS
TABLE OF CONTENTS ......................................................1
PACKAGE CONTENTS .................................................... 1
FEATURES ....................................................................... 2
SPECIFICATIONS ............................................................ 2
TYPICAL HOOKUP AND OPERATION ............................ 3
INTRODUCTION
Congratulations on your purchase of one of the most innovative
VGA signal distribution products on the market today, the SB-
1102 with (2) VGA outputs. This product provides (2) VGA
outputs that are identical to the VGA source signal. This is useful
for distributing signals from a high resolution quality VGA 2048 x
2048 computer to (2) separate components.
PACKAGE CONTENTS
Check that you have the following components;
• SB-1102 VGA Distribution Amplifier
• Users Guide
• AC/DC Adapter: 12VDC, 300mA
AC/DC Adaptor Types : CE/UL/SAA/BS
1
VGA RGBHV Distribution Amplifiers Series
Thank you for purchasing the SB-1102 VGA (RGBHV) distribution amplifier. You will find this unit easy to install
and highly reliable but it is essential that you read this manual thoroughly before attempting to use this amplifier.
TABLE OF CONTENTS
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update
or to keep current the information contained in this document.
We reserve the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise — without express written permission and consent
© Copyright 2015. All Rights Reserved.
Version 2.0 APR 2015
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.
CONFORMANCE TEST REPORT
FOR
EN55020 / EN55024
REPORT NUMBER: ET93S-12-050-1
FOR
FCC 47 CFR/Part 15 Subpart B
REPORT NUMBER: ET93S·12·050·02
Model Number: SB-1102G
Comment Number: SB-1116(G), SB-1112(G), SB-1110(G), SB-1108(G),
SB-1106(G), SB-1104(G), SB-1102(G)
Input:
VGA (RGBHV), HD-15Pin Connector
Output:
VGA (RGBHV), HD-15Pin Connector
Power Input:
+DC12V@300~660mA
