14
Before making any connections to the switcher, observe the following:
• Ensure the main voltage supply matches the label on the supplied plug-pack (+/-10%).
• Ensure that the power switch is OFF.
• Ensure that all system grounds (earth) are connected to a common point.
• Avoid powering equipment within a system from multiple power sources that may be separated by large distances.
• Connect all audio video sources and destination equipment.
• Power up all source and destination audio-visual sources.
• For each destination output select the appropriate input source by using the front panel input select buttons. The supplied IR remote
control. Or through the RS-232 serial communications port.
• Upon powering up the switcher, it will return to its last used setting before being powered down.
REMOTE CONTROL
IR REMOTE CONTROL KEY :
1. & 2. SWITCH POWER ON or OFF:
Power ON and OFF
3. DESTINATION: 1 thru 8 OUTPUT SELECTION:
Destination buttons to select the output display channel
4. SOURCE: 1 thru 8 INPUT SOURCE SELECTION:
Input 1~8 source selection buttons
5. FUNCTION KEY:
Function selection buttons
ARC
AUX
HDBaseT
™
ALL
OFF
RECALL
MEMORY
ENTER
LOCK
REMOTE CONTROL
