WR54-01
54M Wireless Router User Guide
- 36 -
button.
6. Click the
Add New...
button and enter the MAC address 00-0A-EB-00-07-8A in the
MAC
Address
field, enter wireless station C in the
Description
field, select
128-bit
in the
Privilege
pull-down list, enter 2F34D20BE2E54B326C5476586A in the
WEP Key
field and select
Enabled
in the
Status
pull-down list. Click the
Save
and the
Return
button.
The filtering rules that configured should be similar to the following list:
)
Note:
1) If you select the radio button
Allow the stations not specified by any enabled entries in
the list to access
for
Filtering Rules,
the wireless station B will still not be able to access
the router, however, other wireless stations that are not in the list will be able to access the
router.
2) If you enable the function and select the
Deny the stations not specified by any enabled
entries in the list to access
for
Filtering Rules,
and there are not any enable entries in the
list, thus, no wireless stations can access the router.
5.5.3 Wireless Statistics
This page shows
MAC Address
,
Current Status
,
Received Packets
and
Sent Packets
for each
connected wireless station.
Figure 5-20 The router attached wireless stations
¾
MAC Address -
The connected wireless station's MAC address
¾
Current Status
-
The connected wireless station's running status, one of STA-AUTH /
STA-ASSOC / AP-UP / WPA / WPA-PSK /WPA2/WPA2-PSK/None
¾
Received Packets
-
Packets received by the station
¾
Sent Packets
-
Packets sent by the station
