WR54-01
54M Wireless Router User Guide
- 54 -
will the flood filters be effective.
¾
Enable ICMP-FLOOD Attack Filtering -
Enable
or
Disable
the
ICMP-FLOOD
Attack
Filtering.
¾
ICMP-FLOOD Packets threshold: (5 ~ 3600) -
The default value is 50. Enter a value
between 5 ~ 3600 packets. When the current
ICMP-FLOOD
Packets numbers is beyond the
set value, the router will start up the blocking function immediately.
¾
Enable UDP-FLOOD Filtering -
Enable
or
Disable
the
UDP-FLOOD
Filtering.
¾
UDP-FLOOD Packets threshold: (5 ~ 3600) -
The default value is 50. Enter a value
between 5 ~ 3600 packets. When the current
UPD-FLOOD
Packets numbers is beyond the
set value, the router will start up the blocking function immediately.
¾
Enable TCP-SYN-FLOOD Attack Filtering - Enable
or
Disable
the
TCP-SYN- FLOOD
Attack Filtering.
¾
TCP-SYN-FLOOD Packets threshold: (5 ~ 3600) -
The default value is 50. Enter a value
between 5 ~ 3600 packets. When the current
TCP-SYN-FLOOD
Packets numbers is
beyond the set value, the router will start up the blocking function immediately.
¾
Ignore Ping Packet from WAN Port
-
Enable
or
Disable
ignore ping packet from WAN port.
The default is disabled. If enabled, the ping packet from the Internet cannot access the
router.
¾
Forbid Ping Packet from LAN Port
-
Enable or Disable forbidding Ping Packet to access
the router from the LAN port. The default value is disabled. If enabled, the ping packet from
the LAN port cannot access the router. (Defends against some viruses)
Click the
Save
button to save the settings.
Click the
Blocked DoS Host List
button to display the DoS host table by blocking. The page will
appear that shown in Figure 5-43:
Figure 5-43 Thwarted DoS Host Table
This page shows
Host IP Address
and
Host MAC Address
for each host blocked by the router.
¾
Host IP Address-
The IP address that blocked by DoS are displayed here.
¾
Host MAC Address -
The MAC address that blocked by DoS are displayed here.
To update this page and to show the current blocked host, click on the
Refresh
button.
