MGP34 Operator Manual
Supreme Bench Sander
8
START-UP
WARNING:
Eye protection should always be worn by the operator
and others in the work area when setting up the
machine. Eye protection is required for protection from
flying debris and dust, which could cause eye injury.
Before shipment, your Supreme Sander was checked at the factory for proper
adjustment and operation. However, due to the possibility of jarring or damage
during handling and shipping, it is necessary to check that the machine is in
proper working order before use.
WARNING:
Before initial start up, turn the motor shaft by hand to
ensure that all parts are free.
BEFORE CONNECTION TO AN ELECTRICAL POWER SUPPLY:
1.
Check that the switch is off.
2.
Check that the bayonet with the sanding wheel is locked in place on the
motor shaft.
WARNING:
As with any piece of electrical equipment, there is an
ever present hazard of electrical shock when operating
or touching the Sander. Ensure the machine is properly
grounded at all times.
Do not force the equipment. It will do the job better and
safer at the rate for which it was designed.
SANDING BELT REPLACEMENT
WARNING:
Eye protection should always be worn by the operator
and others in the work area when changing sanding belt.
Eye protection is required for protection from flying
debris and dust, which could cause eye injury.
(Sanding belts can be obtained in various grit to suit your needs and are easily
changed.)
WARNING:
Some sanding belts are constructed to rotate in one
direction only. Check arrow inside sanding belt for
rotation. Incorrect installation can cause sudden belt
failure resulting in serious injury to operator and others
in the work area.
