-25-
Model M1117 (For Machines Mfd. Since 9/21)
M
A
INTE
N
A
N
CE
Lubrication
There are a number of parts on this machine that undergo
a lot of movement and must remain lubricated for smooth
operation and long life.
Pivot.Pins
Oil Type .......................................ISO 32 Equivalent
Oil Amount ............................................ 1–2 Drops
Lubrication Frequency .................................... Daily
Use a wire brush to clean any built-up grease from pivot
pins (see
Figure.22
) before applying a few drops of
lubricant to the exposed portions of all four pivot pins.
Keep your hands and fingers away from shearing area and
press down on the foot pedal a few times to distribute
the lubricant.
Items.Needed.
Qty
Wire Brush .......................................................1
Shop Rags ............................................ As Needed
Light Machine Oil or ISO 32 Equivalent.......... As Needed
Figure.22.
Location of pivot pins (2 of 4
shown).
Shearing.Blades
Oil Type .......................................ISO 68 Equivalent
Oil Amount ............................................ 1–2 Drops
Lubrication Frequency ................................. Weekly
Items.Needed.
Qty
Protective Gloves ...........................................1 Pr.
Shop Rags ............................................ As Needed
Mineral Spirits ....................................... As Needed
Light Machine Oil or ISO 68 Equivalent.......... As Needed
While wearing protective gloves, use a rag and mineral
spirits to clean away grease and built-up grime from the
surfaces of the shearing blades (see
Figure.23
). Once the
blades are dry, apply oil to the surfaces with a clean rag.
Figure.23.
Location of lower shearing
blade surface.
Surface of
Shearing Blade
Summary of Contents for M1117
Page 40: ......
