-13-
Model M1117 (For Machines Mfd. Since 9/21)
SE
TU
P
Figure.6.
Minimum working clearances.
Machine.Placement
Physical.Environment
The physical environment where the machine
is operated is important for safe operation
and longevity of components. For best results,
operate this machine in a dry environment
that is free from excessive moisture, hazardous
chemicals, airborne abrasives, or extreme
conditions. Extreme conditions for this type
of machinery are generally those where the
ambient temperature range is outside 41°–104°F;
the relative humidity range is outside 20–95%
(non-condensing); or the environment is subject
to vibration, shocks, or bumps.
Space.Allocation
Consider the largest size of workpiece that
will be processed through this machine and
provide enough space around the machine
for adequate operator material handling or
the installation of auxiliary equipment. With
permanent installations, leave enough space
around the machine to open or remove doors/
covers as required by the maintenance and
service described in this manual.
See.below.for.
required.space.allocation.
Weight.Load
Refer to the
Machine Specifications
for the
weight of your machine. Make sure that the
surface upon which the machine is placed will
bear the weight of the machine, additional
equipment that may be installed on the
machine, and the heaviest workpiece that will
be used. Additionally, consider the weight of
the operator and any dynamic loading that may
occur when operating the machine.
Lighting
Lighting around the machine must be adequate
enough that operations can be performed
safely. Shadows, glare, or strobe effects that
may distract or impede the operator must be
eliminated.
Children. or. untrained. people.
may.be.seriously.injured.by.this.
machine..Only.install.in.an.access.
restricted.location.
Keep Area
Unobstructed
Keep Area
Unobstructed
62"
74"
Summary of Contents for M1117
Page 40: ......
