background image

This manual provides critical safety instructions on the proper setup, operation, 
maintenance, and service of this machine/equipment.

Failure to read, understand, and follow the instructions given in this manual may 
result in serious personal injury, including amputation, electrocution, or death.

The owner of this machine/equipment is solely responsible for its safe use. 
This responsibility includes, but is not limited to, proper installation in a safe 
environment, personnel training and usage authorization, proper inspection 
and maintenance, manual availability and comprehension, application of safety 
devices, blade/cutter integrity, and the usage of personal protective equipment.

The manufacturer will not be held liable for injury or property damage from 
negligence, improper training, machine modifications, or misuse.

Some dust created by power sanding, sawing, grinding, drilling, and other 
construction activities contains chemicals known to the State of California to 
cause cancer, birth defects, or other reproduction harm. Some examples of 
these chemicals are:

•  Lead from lead-based paints.
•  Crystalline silica from bricks, cement, and other masonry products.
•  Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type 
of work. To reduce your exposure to these chemicals: Work in a well ventilated 
area, and work with approved safety equipment, such as those dust masks that 
are specially designed to filter out microscopic particles.

Summary of Contents for SHOP FOX W1777





















Reviews: