-42-
Model W1843 (For Machines Mfd. Since 3/17)
PA
RT
S
Labels & Cosmetics
Safety labels warn about machine hazards and how to prevent serious personal injury. The owner
of this machine MUST maintain the original location and readability of all labels on this machine.
If any label is removed or becomes unreadable, REPLACE that label before allowing machine to
be operated again. Contact us at
(
360
)
734-3482 or www.woodstockint.com to order new labels.
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING!
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
WARNING!
DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE,
OR SERVICE.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at
manuals@grizzly.com
G1015 Machine Labels B
(12/2/16)
• Scale= 1:1 (unless otherwise noted)
• Labels MUST be made of chemical-resistant material
***IMPORTANT***: Labels marked *** have changed since last sending.
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COLOR CODES
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without
approval.
If artwork changes are required, contact us immediately at
manuals@woodstockint.com
.
MODEL W1843
KNIFE BELT SANDER/BUFFER
Specifications
Motor: 1 HP, 110V, 1-Ph, 14A, 60 Hz
Belt Speed: 3600 FPM
Spindle Speed: 1725 RPM
Belt Size: 2"W x 72"–76"L
Max. Buffing Wheel Dia.: 10"
Max. Buffing Wheel Width: 3/4"
Buffing Wheel Bore: 5/8"
Belt Arm Tilt: 0°–90°
Weight: 105 lbs.
To reduce risk of serious injury when using this machine:
1.
Read and understand manual before starting machine.
2.
Always wear eye protection and respirator.
3.
Only plug power cord into grounded outlet.
4.
Never place hands directly on the belt or wheel.
5.
DO NOT wear loose clothing, gloves, or jewelry. Secure
long hair and button all long sleeves.
6.
Make sure machine is properly adjusted and set up
correctly before starting motor.
7.
Disconnect machine from power before adjustments,
maintenance, belt changes, or service.
8.
Always sand on downward side of belt (front of belt).
9.
Always keep workpiece firmly on tool rest.
10. Never sand with knife tip or sharp edge of blade facing
into sanding/buffing rotation.
11. DO NOT operate when tired or under the influence of
drugs or alcohol.
; s r e s u
d e n i a r t n
u
r o
n e r d l i h c
y b
e s u
d e z i r o
h t u a n
u
t n e v e r P
. 2 1
restrict access or disable machine when unattended.
WARNING!
Date
S/N
Mfd. for Woodstock in T
aiwan
W1843 Machine Labels
(04/04/17)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
SF LOGO RED
PANTONE 1795C
SF LOGO YELLOW
PANTONE 600C
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING!
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair
, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
WARNING
!
DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE,
OR SERVICE.
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360
) 734-3482.
WARNING!
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
Woodstock will not accept labels changed without
If artwork changes are required, contact us immediately at
manuals@woodstockint.com
.
MODEL W1843
KNIFE BELT SANDER/BUFFER
To reduce risk of serious injury when using this machine:
1.
Read and understand manual before starting machine.
2.
Always wear eye protection and respirator.
3.
Only plug power cord into grounded outlet.
4.
Never place hands directly on the belt or wheel.
5.
DO NOT wear loose clothing, gloves, or jewelry. Secure
long hair and button all long sleeves.
6.
Make sure machine is properly adjusted and set up
correctly before starting motor.
7.
Disconnect machine from power before adjustments,
maintenance, belt changes, or service.
8.
Always sand on downward side of belt (front of belt).
9.
Always keep workpiece firmly on tool rest.
10. Never sand with knife tip or sharp edge of blade facing
into sanding/buffing rotation.
11. DO NOT operate when tired or under the influence of
drugs or alcohol.
; s r e s u
d e n i a r t n
u
r o
n e r d l i h c
y b
e s u
d e z i r o
h t u a n
u
t n e v e r P
. 2 1
restrict access or disable machine when unattended.
WARNING!
W1843 Machine Labels
(04/04/17)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
SF LOGO RED
PANTONE 1795C
SF LOGO YELLOW
PANTONE 600C
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING!
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair
, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
WARNING!
DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE,
OR SERVICE.
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
734-3482.
WARNING!
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Woodstock will not accept labels changed without
approval.
If artwork changes are required, contact us immediately at
manuals@woodstockint.com
.
restrict access or disable machine when unattended.
S/N
Mfd. for Woodstock in Taiwan
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
SF LOGO RED
PANTONE 1795C
SF LOGO YELLOW
PANTONE 600C
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING!
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
WARNING!
DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE,
OR SERVICE.
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360) 734-3482.
WARNING!
MODEL W1843
KNIFE BELT SANDER/BUFFER
Specifications
Motor: 1 HP, 110V, 1-Ph, 14A, 60 Hz
Belt Speed: 4500 FPM
Spindle Speed: 1725 RPM
Belt Size: 2"W x 72"–76"L
Max. Buffing Wheel Dia.: 10"
Max. Buffing Wheel Width: 3/4"
Buffing Wheel Bore: 5/8"
Belt Arm Tilt: 0°–90°
Weight: 105 lbs.
To reduce risk of serious injury when using this machine:
1. Read and understand manual before starting machine.
2. Always wear eye protection and respirator.
3. Only plug power cord into grounded outlet.
4. Never place hands directly on the belt or wheel.
5. DO NOT wear loose clothing, gloves, or jewelry. Secure
long hair and button all long sleeves.
6. Make sure machine is properly adjusted and set up
correctly before starting motor.
7. Disconnect machine from power before adjustments,
maintenance, belt changes, or service.
8. Always sand on downward side of belt (front of belt).
9. Always keep workpiece firmly on tool rest.
10. Never sand with knife tip or sharp edge of blade facing
into sanding/buffing rotation.
11. DO NOT operate when tired or under the influence of
drugs or alcohol.
;
s
r
e
s
u
d
e
n
i
a
r
t
n
u
r
o
n
e
r
d
li
h
c
y
b
e
s
u
d
e
z
i
r
o
h
t
u
a
n
u
t
n
e
v
e
r
P
.
2
1
restrict access or disable machine when unattended.
WARNING!
Date
S/N
Mfd. for Woodstock in Taiwan
W1843 Machine Labels
(04/04/17)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
101
102
103
104
105
102
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
101
X1843101
COMBO WARNING LABEL
104
X1843104
MACHINE ID LABEL
102
X1843102
ROTATION DIRECTION LABEL
105
X1843105
TOUCH-UP PAINT, SHOP FOX WHITE
103
X1843103
ELECTRICITY LABEL
